USA > New York > Orange County > Newburgh > Newburgh; her institutions, industries and leading citizens, historical, descriptive and biographical > Part 47
Note: The text from this book was generated using artificial intelligence so there may be some errors. The full pages can be found on Archive.org (link on the Part 1 page).
Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 | Part 9 | Part 10 | Part 11 | Part 12 | Part 13 | Part 14 | Part 15 | Part 16 | Part 17 | Part 18 | Part 19 | Part 20 | Part 21 | Part 22 | Part 23 | Part 24 | Part 25 | Part 26 | Part 27 | Part 28 | Part 29 | Part 30 | Part 31 | Part 32 | Part 33 | Part 34 | Part 35 | Part 36 | Part 37 | Part 38 | Part 39 | Part 40 | Part 41 | Part 42 | Part 43 | Part 44 | Part 45 | Part 46 | Part 47 | Part 48 | Part 49 | Part 50 | Part 51 | Part 52 | Part 53 | Part 54 | Part 55 | Part 56 | Part 57 | Part 58 | Part 59 | Part 60
LEWIS M. SMITH was born January 8, 1833, at Monticello, Sullivan County, N. Y. When six years old he moved with his parents to Hudson, N. Y., where he attended the public school and Hudson Academy. His father died in 1846 ; then the family returned to Monticello. July 15, 1848, he came to Newburgh, and found employment as a clerk in the hardware store of the late James S. Brown (now known as No. 69 Water Street), where he remained until 1863. During this time, in 1855, he established a sash and blind factory and planing-mill on Sonth Water Street, near Washington Street, where he con- ducted the business for five years; when he formed a co-partnership with William H. Wood under the firm name of L. M. Smith & Co. In 1863 the firm engaged in the manufacture of box and cattle cars for the Atlantic and Great Western Railroad Company, now known as the New York, Pennsylvania and Ohio Railroad, and carried on this business for three years, when the plant was destroyed by fire. The firm then purchased the business of James S. Brown, Mr. Wood retiring January 1, 1867. In 1870 Charles J. Lawson became a partner in the business, and on Angust I, 1871, he bought ont Mr. Smith's interest. In the meantime (1869) Mr. Smith became interested with the firm of Chadhorn, Coldwell & Co. in the manu- facture of lawn-mowers, then in its infancy. A stock company was organized for the manufacture of these machines Jannary 1, 1870, and Mr. Smith was elected Treasurer, which position he still retains.
September 1, 1871, he purchased the interest of Amos R. Wood in the Newburgh Steam Engine Works, and the firm was known as Whitehill, Smith & Co. The business, after being carried on for
HAVEN
R.
R
HART.
HART.
RIVER
NEW
D
IST.
CONNECTICUT O
R.
T
ANEW
R.
ENG
ENG.
S
COLONY
T
NORTHAMP.
WORCESTER
a
VERMONT
R
LOWELL
--
Adams
CENTRAL
ER
LOWELL
D
R.
TR.
CEAN
242
NEWBURGH.
twenty years, was absorbed in 1891 by a corporation known as the Whitehill Engine and Pictet Ice Machine Company, of which Mr. Smith is Treasurer. These two interests have occupied a large por- tion of his time and attention. The lawn-mower business particularly has received his special attention, and from small beginnings he has been instrumental in making it one of the largest industries of its kind in this or any other country. In 1890 Mr. Smith, in connection with Robert Whitehill and Daniel S. Waring, purchased the Walsh paper-mill property on Qnassaick Creek, where they established a factory for manufacturing artificial ice.
Although Mr. Smith is a very busy man, he still finds time to give attention to matters connected with the welfare of our city, and takes more than a passing interest in the duties devolving upon all good citizens. He was City Treasurer in 1869-70; a commissioner of the Water Board in 1875-76; a member of the Board of Education from 1881 to 1889, and was for five years its President. It was during Mr. Smith's incumbency that the new academy was erected, and Presi- dent Smith presided both at the farewell to the old academy and at the dedication of the new academy. For twenty-seven years he has been a trustee of the First Baptist Church of this city, and also a member of the Standing Committee. For nineteen years he was superintendent of the Sunday school. He was President of the Young Men's Christian Association in 1888-90, and for a number of years has been one of the directors. His connection with the fire de- partment commenced with his joining Washington Engine Company, No. 4, in early life. He has been Treasurer of the Newburgh Fire Department Fund for nineteen years, and still holds that office. He is also Vice-President of the State Council of the Order of American Firemen. Mr. Smith was one of the incorporators and has ever since been a trustee of Woodlawn Cemetery, and was its first Treasurer.
PHOTO. BY ATKINSON.
LEWIS M. SMITH.
He is also a director of the Highland National Bank, and a trustee of Washington's Ileadquarters.
Mr. Smith was made a Master Mason in Newburgh Lodge, No. 309, F. and A. M., April 17, 1863. He is also a member of the Chap- ter and the Commandery, and has held various offices in all of those
bodies. At this time (1891) he is Master of Newburgh Lodge, and also President of the Masonic Hall Association.
In politics Mr. Smith has always been a Democrat and taken ac- tive part in the affairs of that party. He has been several times chairman of the County Committee, and has often been solicited to
-
RESIDENCE OF LEWIS M. SMITH-162 Grand Street.
permit his name to be used for various local offices, but with few exceptions, he has declined.
Mr. Smith was married September 6, 1855, to Sarah E., daughter of Isaac Martin, and has six sons: Lewis M., Jr., is connected with the Whitehill Engine and Pictet Ice Machine Company; Edwin T., who is the secretary of the Chadborn & Coldwell Manufacturing Company; Henry M., George K., William L. and Nathaniel D.
WILLIAM WRIGHT, inventor and constructing engineer. This gentleman ranks as one of the foremost men of his time in the field of steam-engineering. He invented early in his career improvements which revolutionized the construction of the steam engine, and though another secured for a time the public credit therefor, the genius of Mr. Wright is now recognized and honored. For many years he has been manufacturing in this city, principally, his patent automatic cut- off engine, which is known all the world over.
This engine is built upon a solid cast-iron bed plate. The cylinder is fitted with an automatic expansion valve-gear, and the point of cut-off is determined by the governor. The portion of the frame which in ordinary engines is devoted to the usual flat side, consists of a hollow cylinder arranged concentrically with the steam cylinder, and serves as a guide for the crosshead, the guiding cylinder being simply bored out to receive the crosshead. There are lateral openings in this cylindrical guiding portion of the frame, in order that access may be had to the crosshead and stuffing-box of the piston-rod. This combination conduces to simplicity, strength and economy in the construction of the frame. The steam cylinder itself rests on a separate bed plate, to which it is securely bolted, the bottom of which is at the same level with the pillow block and of the bed plate. The cylinder-foot carries all necessary rocker-shafts for the valve gear. There are four valves, known as the gridiron slide valves, which work vertically in chests cast with the cylinder, two upon one side being for induction or cut-off, and two upon the opposite side being for eduction or exhaust steam. The steam valves are V shaped, partly balanced valves, with correspondingly shaped valve seats, which are bolted separately to the cylinder by composition bolts. All valve motion is derived from a single eccentric, which operates levers so arranged as to give quick opening movement to valves when opening, and also
243
NEWBURGH.
a very slow movement when the valves are lapped. The location of all these valve-faces close to the base of the cylinder, insures the least possible amount of clearance.
The steam valve-stems are fastened in yokes, which have, at their lower ends, plungers fitted in dash-pots, the same acting as guides. The yokes are operated by steel slides fitted through the ends of hollow rocker-arms, and which act upon the swinging toes held in the yokes, the said slide having a diagonal slot in which works a feather, this feather being made on a rod which has a longitudinal movement through the bollow rocker-arm and to which the governor is connected. By this longitudinal motion and through the diagonal featber and slot, the slide is automatically set, to engage more or less with the swinging toes, and which gives the valves the proper lift and liberates upon the chord of the arch.
The governor itself stands upon a bracket or shelf cast on the slide part of the bed plate, and the governor-rod is connected to a lever, which is fastened to the governor-shaft. This same shaft carries two forked arms, which take hold of the small rods running through the hollow rocker-shaft. The rods are en- larged at their other ends, where they carry tbe adjustable slides mentioned before. The advantage of this arrangement of valves and valve-gearing is easy accessibility to each valve. By the simple removal of a bonnet, the valves can easily be taken from the T headed valve stems and the valve seats inspected . The very important and desirable fact is that the whole of the valve-gear and governor connections are outside of the steam chests, where any derangement can at once be seen and rectified.
The steam piston is fitted with steam packing-rings, and a brass shoe reach- ing around the lower half of the piston; which is adjusted by set-screws to carry the weight of the piston, so that the packing-rings carry their own weight only and can act freely. The piston-rod, crank and cross-head pins, valve-stems and all smaller wrist-pins and all heads of connections are made of steel; all connections have adjustable brass boxes. The cross-head, which is made of castiron, has a large shoe at top and bottom, lined with anti-friction metal, fitted to the bore of the slide, and is adjusted by set-screws to take up the wear. The connecting-rod is made of the best hammered wrought iron, with composition boxes. The crank shaft is made of the best hammered wrought iron. It has long bearings, one in the main bed plate, and one in an outside pillow-block, both lined with anti-friction metal, and the main bearing with adjustable side- boxes.
Mr. Wright has recently patented an improved rotative valve, which he is applying to his latest improved engine. The Wright engines have acquired their wide reputation because of their uni- formly excellent performances. Many of them are used in foreign countries, and numerous testimonials from manufacturers and cor- porations in this country bear evidence to their efficiency, economy and reliability. The great engines used on the Brooklyn Bridge were built by Mr. Wright. He also manufactures machinery of various kinds, high and low pressure boilers, and marine as well as stationary engines. The engines of the fast propeller Homer Rams- dell were built by Mr. Wright. He has also a large assortment of patterns for hoisting engines, horizontal and vertical blast engines, and wrought-iron work of every description.
For more than twenty years past Mr. Wright has occupied an ex- tensive series of buildings, formerly known as the Washington Iron Works, and employing about 200 men. In 1890 he began to build new works in the northern part of the city, which are now practically completed and ready for occupation. They are situated on the old Sherman dock property, and have a river frontage of five hundred feet. There is a substantial pier with a frontage of 205 feet and a depth of 350. The West Shore Railroad runs through the premises, and the shops stand on the west side of the tracks. They have thus both rail and water communication at their doors. It is an ideal situ- ation for a manufactory. The buildings are all constructed of brick in a substantial and handsome manner. The largest is exactly 400 feet long and 100 wide. The walls are 28 inches thick. The main floor of the south-half of this building contains the principal machine- shop, which is 200 feet long and 100 wide. The roof being supported by trusses, it has a clear floor space, except through the middle where there is a long double line of lathes, with heavy posts to support the shafting and the railroads for the traveling-cranes. These cranes are one of the notable features of the shop. They can pick up and carry 25 tons' weight to any particular place in the room. They cost about $10,000 to construct. There are two large pit lathes that cost a like sum. They will turn a wheel 32 feet in diameter and 6 feet face. Besides these there are many smaller lathes, and planers, shapers, drills and a large assortment of tools. A large part of the machinery was designed and built expressly for this shop by Mr. Wright. At the south end of this room, supported by iron rods from
the roof, is a large gallery on which is a tool room and various imple- ments for doing small work.
Beneath the machine shop is a basement 150 feet in length by 50 in width, in which are emery wheels, grindstones, bolt-cutting ma- chines, etc. There is also a fire pump connected with the river and with fire plugs in various parts of the premises.
In the north part of the main building is the foundry, with a clear floor space of 175x100 feet. The floor is filled with moulding-sand, obtained on the premises. The foundry contains a large, new furnace and cupola of the best pattern, besides every convenience for mould- ing and handling large masses of iron. A railway connects it with the machine-shop. In the middle of the main building are the engine and boiler rooms. The engine has 100 horse-power.
West of the main building is another which is 150 feet in length, 50 in width and two stories high. It contains the smith's shop, pat- tern-shop and storerooms. South of the main building is the office, 30x40 feet and three stories high. The basement will be used for
PHOTO. BY WHIDDIT.
WILLIAM WRIGHT.
storage, the main floor for offices, and the third story for drafting- rooms. A boiler-shop will soon be erected on the dock, east of the railroad tracks. There are several fine springs on the premises, which have all been piped into one cistern in the north end of the machine- shop. The establishment is extensive, complete and convenient, and represents an outlay of $150,000.
William Wright is the son of Jacob Wright, who was born in the Town of Fishkill, and was the son of Joseph Wright, a soldier of the Revolution, who was the son of William Wright, a civil officer under commission from King George. Jacob Wright married Mary Drake, of the Town of Fishkill, and moved to Wayne County, N. Y. His son William, the second of a family of four children who reached ma- ture years, was born near Newark, N. Y., May 17, 1818. Early in life William manifested a great interest in machinery and a liking for mechanical employments. The steam engine, then in the first stages of its development, especially attracted his attention. His hours out of school were mostly spent " in making something," and even in school the natural direction of his thoughts was indicated by the pic-
244
NEWBURGH.
tures of steam engines which he drew on his slate. The first engine he ever saw was driving a little foundry at Marion, a village twelve or fifteen miles from his home. He walked all the way there to see it. That engine gave him an idea of the exterior parts, but not of the inside. The parts which puzzled him most were the valves. Subse- quently a wood-turner of his town purchased a small engine for his shop, and one day at noon, while the engine was idle, young Wright asked the privilege of taking the cover off the steam-chest and look- ing inside. Permission was reluctantly given upon the condition that the cover should be in place again before the time to resume work. By the aid of a monkey-wrench he soon had the interior ex- posed, and after he had seen all he wished he replaced the cover in good season. From the knowledge thus obtained he built from crude materials a steam engine in the cellar of his father's house. Some of the ironwork he made in the blacksmith-shop of a carriage-factory, being assisted by the smith, whom he repaid by blowing his bellows and cutting his cordwood.
This unusual accomplishment by a boy of his age (he was then only sixteen) attracted the attention of many people, one of whom, John Daggett, a manufacturer of machinery for woolen mills, receiv-
of the engine works of Corliss, Nightingale & Co., which had been established but a short time before. The Corliss engine had no spec- ial merit over the other machines of that period till Mr. Wright in- vented the rotative valve, which revolutionized the construction of the steam engine, and gave the Corliss engine the great prominence it obtained. A few engines had been built, in which the releasing gear invented by Mr. Corliss had been applied to different forms of slide valves with more or less satisfaction, mostly less, so far as the practical working of the valve was concerned. Meanwhile the efforts of the inventor were bent in the direction of a valve better adapted to the requirements of his cut-off which had demonstrated its superiority as a means of regulation. At this time an order had been taken for an engine for the Elm Street foundry in Providence, of which the father of William A. Harris, the present head of the engine company of that name, was superintendent. The frame and connections of the beam engine had been made, but the cylinder had been allowed to wait, pending the evolution of an improved valve. Mr. Harris be- came urgent in his demands for delivery, and on April 17, 1849, Mr. Wright approached Mr. Corliss with the question of the delayed cyl- inder. In the conversation which followed Mr. Wright took up a
RESIDENCE OF WILLIAM WRIGHT-Grand Avenue.
ed him as an apprentice to learn the machinist trade. He remained with Mr. Daggett two years and a half, then moved to Niagara Falls and worked in the repair shops of the Buffalo and Niagara Falls Railroad. In those days there were few books and no periodicals published on the subject of steam engines. Mr. Wright searched through the bookstores of Buffalo without finding any except a book by John Ericsson on hot-air engines. His next place of employment was at Palmyra, where he worked on a stationary engine till 1842. In the meantime by persistent study and experimenting he had be- come expert both in the theory and practice of engine-building, and after leaving Palmyra he began to build engines at Rochester in con- nection with John Bush.
In 1845 he invented a rotary engine and moved to Providence, R. I., where he formed a partnership with F. S. Church to build it. This business was discontinued at the end of a year. Then for a short period Mr. Wright was employed by a tool company of which William Fields was manager, and which was afterwards merged into the Prov- idence Tool Company, and finally he was engaged as superintendent
piece of paper and made a sketch of the rotative valve. This sug- gestion was greeted by Mr. Corliss with the statement that if he couldn't have something better than that he wouldn't have anything. Nothing better seems to have offered, however, for thousands of en- gines have been built in this way, and the appliance became univer- sally known as the Corliss valve.
The original sketch of this valve, drawn by Mr. Wright in 1849, verified by a fellow-workman, and adopted at that time by Corliss, is still in Mr. Wright's possession. He not only designed the valve, but superintended the construction of the first engine to which it was ap- plied, which is still in operation. At a later period Mr. Corliss attempted to enjoin Mr. Wright in the United States Court from em- ploying the principal of automatic cut-off, but failed to maintain a case.
Mr. Wright withdrew from the employ of Corliss, Nightingale & Co. in 1850, and after building a large condensing engine for a Water- bury firm he accepted the position of general superintendent of the large engine works of Woodruff & Beach, at Hartford, Ct. During
NEWBURGH.
245
THE WRIGHT ENGINE WORKS.
MEN.CO
the thirteen years he was in that important position Mr. Wright devised a number of improvements, notably another automatic cut-off engine. He invented, patented and superintended the construction and erection of the massive pumping engines for the Brooklyn Water Works. He also superin- tended the construction and erection of the United States gunboat Kearsarge and other gunboats used in the Rebellion.
From 1863 to 1866 he was a member of the New York Steam Engine Company, and built the engines of a number of men-of-war. Thus in almost every branch of steam engi- neering he has made his mark. In 1866 Mr. Wright obtained further patents, and arranged with the Washington Iron Works, of Newburgh, to construct his engines; but he did not take up his residence in New- burgh till 1870, when he organized the firm of William Wright & Co., and purchased the business of the Washington Iron Works. Since 1876 he has conducted the business alone. From time to time his engines have been improved in minor particulars, for his active brain is always devising something new. Few moments has he allowed to es- cape unemployed. He seeks relaxation from business cares in his library, where the latest and best works in general literature and mechanics have a place. In his youth and early manhood he worked under great disadvantages and suffered many discour- agements, but his "mechanical genius, his patient assiduity in his profession, and his industrious habits have advanced him to a prominent place among the inventors of the age." Mr. Wright married in, 1841, Eliza- beth G. Taft, of Victor, N. Y., and has one daughter living.
THE NEWBURGH STEAM BOILER WORKS. This is one of the largest and best equipped boiler works in the State. The business was established in 1870 by John Boland and Patrick Delany, both of whom had previously been employed at the boiler works of Alexander Cauldwell. Their shop was first located in South Water Street, adjoining Shaw's planing-mill. In 1878 Mr. Delany succeeded the old firm, and carried on the business until the first of January, 1890, when he admitted into part- nership Albert N. Chambers, who had been with him since 1878. The place is known as the Newburgh Steam Boiler Works, and the firm name is P. Delany & Co. They have been engaged all these years in the construction of all kinds of boilers, and the United States Government has been a most substantial patron in the purchase of the patent whistling buoy, of which they are the sole manufacturers in this country. The Lighthouse Department is also being constantly supplied by this firm with the different styles of buoys which it uses.
Their marine boiler work, always con- siderable, has recently become very exten- sive, and almost all of the Hudson River
246
NEWBURGH.
T
E DELANY 40 STEAM. BOILERS
1 .....
.....
NEWBURGH STEAM
BOILER WORKS
P DELANY &CU)
NEWBURGH STEAM BOILER WORKS.
PATRICK DELANY.
PHOTO. BY ATKINSON
ALBERT N CHAMBERS.
247
NEWBURGH.
towing lines, besides a great many of the New York harbor tugs, have boilers in use, and giving thorough satisfaction, which were made by the Newburgh Steam Boiler Works. They make the boilers for the steam vessels built by the Newburgh shipyard of T. S. Marvel & Co. They also manufacture boilers and tanks, and have done so ever since they first commenced operations in 1870, for the Whitehill Engine and Pictet Ice Machine Company, of Newburgh, formerly the business of Robert Whitehill.
Many of their boilers, about one hundred a year, are sent to New York and Brooklyn, being in use in nearly all the large buildings, mercantile houses, hotels, theatres, etc. One of the largest boiler plants erected by them is in the Hudson River State Hospital at Poughkeepsie, consisting of four boilers 8 feet in diameter and 26 feet long, and two boilers 61/2 feet in diameter and 22 feet long. Besides this, large plants of their boilers can be seen at the West Point Mili- tary Academy, at the State Homœopathic Hospital at Middletown, and almost every factory in Newburgh has from one to five of De- lany & Co.'s boilers.
The shops of this progressive and enterprising concern now cover 25,000 square feet of floor space, being 125 feet wide on Colden and Edward Streets, and 200 feet deep on Renwick Street, extending the depth of the block. The tools used in the manufacture of their specialties are large and expensive, the hydraulic riveting machine alone costing (including the riveting tower) $6,000. When it is con- sidered that they possess tools which are capable of punching a six- inch hole out of a steel plate an inch thick, it is easily seen that their equipment of modern tools includes the most elaborate and the best. Traveling-cranes, of fifteen tons capacity, run two hundred feet- the entire length of the shop. One of the newest special tools used by them is a patent drilling machine for drilling the rivet holes in boilers where absolutely perfect work is required and a high press- ure is to be carried on the boilers. This work is also required by the United States Government, in order that boilers may be allowed the twenty per cent. extra pressure allowed for drilled holes. During the past year their employees averaged one hundred in number, and their yearly pay-roll amounts to about $50,000. Large as the busi- ness is, it is constantly growing. A large addition was made to the works in 1891. At the present writing the firm is at work on a forty- thousand-dollars' contract for the Consumers' Gas Company of New- burgh. Their work bears a high reputation, and the partners are in excellent repute in every way.
Need help finding more records? Try our genealogical records directory which has more than 1 million sources to help you more easily locate the available records.